Product ID:TT-P-31D BROWN 10076
MSDS Date:03/30/1989
FSC:8010
NIIN:00-286-9049
MSDS Number: BJMCQ

Emergency Phone: 718-443-2778

Info Phone: 718-443-2778

Cage: 33151

Cage: 33151

MINERAL SPIRITS

CAS: 64741-41-9

Fraction By Weight: 7.35%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:VAPORS MIGHT BE IRRITATING TO EYES,
NOSE & THROAT. EXCESSIVE EXPOSURE MAY RESULT IN HEADACHE, DIZZINESS
AND NAUSEA. DEFATTING TO SKIN.
Effects of Overexposure:VAPORS MIGHT BE IRRITATING TO EYES, NOSE &
THROAT. EXCESSIVE EXPOSURE MAY RESULT IN HEADACHE, DIZZINESS AND
NAUSEA. DEFATTING TO SKIN.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION.
ANESTHESIA IN HIGH CONCENTRATIONS.

First Aid:INHALATION: PROVIDE FRESH AIR AND REST. SKIN WASH AFFECTED
AREA WITH SOAP AND WATER. INGESTION: DRINK ONE OR TWO GLASSES OF
WATER TO DILUTE, SEE A PHYSICIAN. EYES: FLUSH WITH RUNNING WATER
FOR 15 MINU TES.

Flash Point Method:PMCC
Flash Point:105 F/41 C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS TO AVOID INHALATION OF SMOKE & VAPORS. DO NOT
USE WATER.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS & OPEN FLAMES. VAPORS FORM EXPLOSIVE MIXTURE BETWEEN UPPER &
LOWER EXPLOSIVE UNITS.

Spill Release Procedures:AVOID OPEN FLAME AND SPARK SOURCES. PROVIDE
ADEQUATE VENTILATION. PICK UP SPILL IMMEDIATELY WITH INERT
ABSORBENT(S) AND NON-SPARKING TOOLS. SAFELY DISPOSE OF SATURATED
ABSORBENT(S) BY IMMERSING IN WAT ER. WEAR PROTECTIVE CLOTHING
DURING CLEANUP.

Handling and Storage Precautions:AVOID OPEN FLAMES AND SOURCES. PROVIDE
ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN. AVOID PROLONGED OR REPEATED BREATHING OF VAPOR.

Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK IF
VENTILATION IS INADEQUATE
Ventilation:LOCAL EXHAUST IS RECOMMENDED. MECHANICAL(GENERAL) WITH
APPROVED CLASS D EXPLOSION PROOF MOTOR & SWITCHES
Protective Gloves:NEOPRENE RUBBER GLOVES
Eye Protection:CHEMICAL SAFETY GLASSES
Other Protective Equipment:IMPERMEABLE APRONS AND THE AVAILABILITY OF
EYE WASH STATIONS ARE RECOMMENDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. USE GLOVES AND
AVOID SPILLING ON HANDS, FACE OR BODY. DO NOT SMOKE OR EAT IN WORK
AREA.
Supplemental Safety and Health

Boiling Pt:B.P. Text:315F,157C
Vapor Pres:100 F
Vapor Density:5.0
Spec Gravity:1.69
Evaporation Rate & Reference:13 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED-BROWN COLORED LIQUID, HYDROCARBON ODOR.
Percent Volatiles by Volume:15.94

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS, STRONG ACIDS & BASES.
Stability Condition to Avoid:WARM STORAGE AND IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2, SMOKE & TOXIC VAPORS.
POSSIBLY ACROLEIN

Waste Disposal Methods:DISPOSAL METHODS MUST COMPLY WITH ALL LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.